[Sep 01, 2023] Updates Up to 365 days On Valid HPE6-A73 Braindumps
Best QualityHPE6-A73 Exam Questions HP Test To Gain Brilliante Result
HPE6-A73 exam consists of 60 multiple-choice questions that must be completed within 90 minutes. HPE6-A73 exam is conducted online and can be taken from anywhere in the world. HPE6-A73 exam can be taken in English, Japanese, Simplified Chinese, or Latin American Spanish. HPE6-A73 exam fee is $200 USD, and candidates must achieve a passing score of 70% or higher to earn their certification.
HP HPE6-A73 (Aruba Certified Switching Professional) Exam is an essential certification for professionals who want to demonstrate their expertise in network switching using Aruba technologies. It is a globally recognized certification that validates the skills and knowledge of professionals in designing, implementing, and managing complex network switching solutions. Passing this certification exam will enhance the career opportunities of professionals and provide them with the skills needed to succeed in their roles.
NEW QUESTION # 31
Examine the AOS-CS switch output:
Based on this output, what is correct?
- A. 802.1X authentication occurred and downloadable user roles are deployed
- B. 802.1X authentication was successful, but MAC authentication is yet to start
- C. Only 802.1X authentication is configured on the port
- D. A local user role was deployed using a ClearPass solution
Answer: A
NEW QUESTION # 32
What is correct regarding the operation of VSX and multicasting with PIM-SM routing configured?
- A. Each VSX peers runs PIM and builds its own group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN
- B. Each VSX peers runs PIM and builds its own group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing
- C. Each VSX peers runs PIM and creates a shared group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing
- D. Each VSX peers runs PIM and creates a shared group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN
Answer: A
NEW QUESTION # 33
An administrator is defining a VSX LAG on a pair of AOS-CX switches that are defined as primary and secondary. The VSX LAG fails to establish successfully with a remote switch; however, after verification, the remote switch is configured correctly. The administrator narrows down the problem to the configuration on the AOS-CX switches.
What would cause this problem?
- A. Local optimization was not enabled on the VSX LAG
- B. The VSX LAG hash does not match the remote peer
- C. LACP was enabled in active mode on the VSX LAG
- D. The VSX LAG interfaces are in layer-3 mode
Answer: B
NEW QUESTION # 34
Examine the AOS-CS switch output:
Based on this output, what is correct?
- A. 802.1X authentication occurred and downloadable user roles are deployed
- B. 802.1X authentication was successful, but MAC authentication is yet to start
- C. Only 802.1X authentication is configured on the port
- D. A local user role was deployed using a ClearPass solution
Answer: A
NEW QUESTION # 35
An administrator is designing an access layer solution in a data center. A key requirement is to dual-home mission-critical server connections to two different switches, ensuring that the servers always have network access, even during switch software upgrades. This feature should support strictly-controlled provisioning.
What would best meet the administrator's needs when deploying AOS-CX switches?
- A. VSX
- B. VSF
- C. Dynamic segmentation
- D. NAE
Answer: A
NEW QUESTION # 36
What is correct regarding the operation of VSX and multicasting with PIM-SM routing configured?
- A. Each VSX peers runs PIM and builds its own group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN
- B. Each VSX peers runs PIM and builds its own group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing
- C. Each VSX peers runs PIM and creates a shared group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing
- D. Each VSX peers runs PIM and creates a shared group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN
Answer: A
Explanation:
"both VSX switches as a PIM Designate Router (DR). One node is the actual DR, the other node is the proxy DR." "Only the actual DR performs multicast routing and forward traffic destined to groups to its downstream VLANs in the data-path." https://www.arubanetworks.com/techdocs/AOS-CX/10.07/HTML/5200-7888/Content/Chp_Pre_tra_loss/ip-mul-rou-10.htm
NEW QUESTION # 37
How does PIM build the IP multicast routing table to route traffic between a multicast source and one or more receivers?
- A. It uses the Bellman-Ford algorithm derived from distance vector protocols
- B. It uses IGMP and calculates a shortest path tree (SPT)
- C. It uses the shortest path first (SPF) algorithm derived from link state protocols
- D. It uses the unicast routing table and reverse path forwarding (RPF)
Answer: D
Explanation:
"PIM also relies on the unicast routing tables to identify the path back to a multicast source. This routing method is known as reverse path forwarding (RPF). The unicast routing protocols create the unicast routing tables. With this information, PIM sets up the distribution tree for the multicast traffic.
NEW QUESTION # 38
An administrator is managing a VSX pair of AOS-CX switches An administrator configures the following on the primary AOS-CX switch:
- A. The primary switch will erase VLAN 200 from the VSX pair
- B. The VLAN is only created on the secondary switch.
- C. The operation is not allowed by the switch and a CLI error is displayed
- D. The VLAN is created on both the primary and secondary switches
Answer: D
NEW QUESTION # 39
An administrator in a company of 348 users has a pair of AOS-CX switches with connections to external networks Both switches are configured for OSPF. The administrator wants to import external routes on both switches, but assigns different seed metrics to the routes, as well as imports them as external type-1 routes.
What is the best way for the administrator to accomplish this?
- A. Define the route type and metrics in the OSPF process.
- B. Create a route map with the correct route type and metrics
- C. Create a classifier policy with the correct route type and metrics
- D. Define a class and policy map withthe correct route type and metrics.
Answer: B
NEW QUESTION # 40
A company has just purchased AOS-CX switches. The company has a free and open-source AAA solution.
The company wants to implement access control on the Ethernet ports of the AOS-CX switches.
Which security features can the company implement given the equipment that they are using?
- A. Device fingerprinting
- B. Port-based tunneling
- C. Local user roles
- D. Downloadable user roles
Answer: C
NEW QUESTION # 41
A company has an existing wireless solution involving Aruba APs and Mobility controllers running 8.4 code.
The solution leverages a third-party AAA solution. The company is replacing existing access switches withAOS-CX 6300 and 6400 switches. The company wants to leverage the same security and firewall policies forboth wired and wireless traffic.
Which solution should the company implement?
- A. RADIUS dynamic authorization
- B. User-based tunneling
- C. IPSec
- D. Downloadable user roles
Answer: A
NEW QUESTION # 42
A company has implemented 802 1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA Each switch has the two servers defined A network engineer notices the following command configured on the AOS'CX switches:
radius-server tracking user-name monitor password plaintext arubal23
What is the purpose of this configuration?
- A. Define the account to implement downloadable user roles
- B. implement replay protection for AAA messages
- C. Speed up the AAA authentication process
- D. Define the account to implement change of authorization.
Answer: C
NEW QUESTION # 43
An administrator has configured the following on an AOS-CX switch:
What is the correct ACL rule configuration that would allow traffic from anywhere to reach the web ports on the two specified servers?
- A. access-list ip server 10 permit tcp any group web-servers group web-ports
- B. access-list ip server 10 permit tcp any web-servers group web-ports
- C. access-list ip server 10 permit tcp any object-group web-servers object-group web-ports
- D. access-list ip server 10 permit tcp any web-servers web-ports
Answer: D
NEW QUESTION # 44
Examine the following AOS-CX switch configuration:
Which statement correctly describes what is allowed for traffic entering interface 1/1/3?
- A. Traffic from 10.0.12.0/24 will generate a log record when accessing 10.0.11.0/24
- B. IP traffic from 10.0.11.0/24 is allowed to access 10.1.12.0/24
- C. IP traffic from 10.1.11.0/24 is allowed to access 10.1.110.0/24
- D. IP traffic from 10.1.12.0/24 is allowed to access 172.0.1.0/23
Answer: A
NEW QUESTION # 45
What is the correct way of associating a VRF instance to either a VLAN or an interface?
- A. Switch(config)# vlan <VLAN-ID> vrf attach < vrf-name >
- B. Switch(config)# vlan <VLAN-ID> vrf < vrf-name >
- C. Switch(config)# interface <interface-ID>
Switch(config-if)# vlan access <VLAN-ID> vrf attach <vrf-name> - D. Switch(config)# vlan <VLAN-ID>
Switch(config-vlan-<VLAN-ID># vrf attach < vrf-name >
Answer: D
NEW QUESTION # 46
How is NetEdit installed at a customer location?
- A. Via an Aruba NetEdit hardware appliance
- B. Via a DVD using a virtualized platform like Microsoft's Hyper-V
- C. Via an OVA file and a virtualized platform like VMware's ESXi
- D. Via me Aruba Central cloud solution
Answer: C
NEW QUESTION # 47
An administrator has an AOS-CX switch configured with:
router ospf 1
area 0
area 1 stub no-summary
It is the only ABR for area 1. The switch has the appropriate adjacencies to routing switches in areas 0 and 1.
The current routes in each area are:
Area 0: 5 routes (LSA Type 1 and 2)
Area 1: 10 routes (LSA Type 1 and 2)
External routes: 2 (LSA Type 5)
Based on the above configuration, how many OSPF routes will routing switches see in Area 1?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 48
......
Focus on HPE6-A73 All-in-One Exam Guide For Quick Preparation: https://troytec.dumpstorrent.com/HPE6-A73-exam-prep.html