[Apr 11, 2026] Get Latest and 100% Accurate IN101_V7 Exam Questions
Maximum Grades By Making ready With IN101_V7 Dumps
NEW QUESTION # 47
A radio station transmits an omnidirectional signal that is received by multiple radios. What type of transmission method is used in this example?
- A. Half-duplex
- B. Simplex
- C. Full-duplex
Answer: B
NEW QUESTION # 48
Which of the following steps should be performed first when terminating a coaxial cable?
- A. Verify connector type
- B. Cut the cable
- C. Strip the cable
- D. Fold back the braiding
Answer: A
NEW QUESTION # 49
How long does it take someone to form a first impression?
- A. 1 to 2 minutes
- B. 30 minutes to 1 hour
- C. 5 to 10 minutes
- D. 10 to 15 seconds
Answer: D
NEW QUESTION # 50
A category 8 cable is terminated into category 6A outlets with category 5e patch cords. What is the maximum supported performance level?
- A. Category 7
- B. Category 6A
- C. Category 5e
- D. Category 8
Answer: C
NEW QUESTION # 51
Which of the following is used to equalize potential differences between the SBB on the same floor?
- A. TBB
- B. RBB
- C. BBC
- D. TEBC
Answer: C
NEW QUESTION # 52
Which of the following topologies is the recommended topology for distribution systems in campus environments?
- A. Hierarchical Star
- B. Tree
- C. Star
- D. Ring
Answer: A
NEW QUESTION # 53
Which of the following attachment methods does BICSI recommend for attaching coaxial connectors to coaxial cable?
- A. Push-on
- B. Screw-on
- C. Crimp
- D. Compression
Answer: D
NEW QUESTION # 54
Which of the following is the first step of the emergency rescue process?
- A. Secure the area
- B. Survey the scene
- C. Contact 911
- D. Notify someone
Answer: B
NEW QUESTION # 55
Which of the following is used to express system gain and loss?
- A. Decibel (dB)
- B. Farads
- C. Ohms
- D. Henries
Answer: A
NEW QUESTION # 56
Which of the following is used to perform continuity and length tests for coaxial cable?
- A. TDR (Time domain reflectometer) with an adapter
- B. OLTS (optical loss test set)
- C. VFL (visual fault locator)
- D. OTDR (optical time domain reflectometer
Answer: A
NEW QUESTION # 57
What is the minimum recommended amount of vertical clearance for open-top cable supports?
- A. 75 mm (3")
- B. 125 mm (5")
- C. 150 mm (6")
- D. 100 mm (4")
Answer: A
NEW QUESTION # 58
You are pre-terminating cable. Where should the labels be placed?
- A. Far end
- B. Both ends
- C. Near end
Answer: B
NEW QUESTION # 59
Which of the following is permissible if the available firestop assembly is NOT capable of properly restoring the necessary fire rating?
- A. Substitute products from another assembly
- B. Move the installation to another location
- C. Obtain written assistance from the manufacturer
- D. Add more of the product to increase the rating
Answer: C
NEW QUESTION # 60
What is the markings for non-conductive optical fiber riser cable?
- A. OFNR
- B. OFCR
- C. OFNP
- D. OFNG
Answer: A
NEW QUESTION # 61
What is the maximum allowable horizontal cable length?
- A. 90 m (295')
- B. 50 m (164')
- C. 10 m (33 ')
- D. 30 m (100')
Answer: A
NEW QUESTION # 62
......
Give push to your success with IN101_V7 exam questions: https://troytec.dumpstorrent.com/IN101_V7-exam-prep.html