2023 New 300-610 Exam Questions Real Cisco Dumps
Course 2023 300-610 Test Prep Training Practice Exam Download
The Cisco 300-610 exam will consist of multiple-choice and simulation questions and will test the candidate's understanding of network design principles, best practices, and technologies that are used in data center infrastructure. Candidates are expected to have a thorough understanding of various Cisco products, including the Cisco Nexus and Cisco UCS, and be able to design data center solutions using these technologies. Designing Cisco Data Center Infrastructure certification exam is suitable for IT professionals who have at least five years of experience in designing data center solutions and have the skills required to design complex data center infrastructure.
To prepare for the Cisco 300-610 exam, candidates are advised to take the Designing Cisco Data Center Infrastructure (DCID) course. This course covers all the topics that are tested in the exam and provides hands-on experience in designing data center infrastructure using Cisco technologies. Candidates can also use study materials such as books, practice exams, and online courses to prepare for the exam.
NEW QUESTION # 21
An engineer must design a multitenant solution using Cisco 7709 switches. The solution must support separate routing instances, separate spanning tree domains, and separate firewalls for each tenant.
Which solution meets these requirements?
- A. CFS
- B. VRF
- C. vPC
- D. VDC
Answer: D
Explanation:
Reference:
vmdcDesign22/VMDC_2-2_DG_2.htm
NEW QUESTION # 22
A network engineer must design a Cisco HyperFlex solution based on these requirements:
* two clusters in the main data center consisting of five HyperFlex nodes
* one edge node tor the remote branch
* cluster nodes that use one rack unit of space
Which two devices should be used in the remote branch cluster for this design? (Choose two.)
- A. Gigabit Ethernet Switch
- B. Fabric Interconnect 6300
- C. HX240c
- D. HX220c
- E. UCS B200
Answer: A,D
Explanation:
HX240 is excluded because it is 2RU, while the requirement is to have one rack unit of space.
UCS B200 and FI 6300 are excluded because the solution is required in a branch.
NEW QUESTION # 23
Drag and drop the technologies from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 24
A company Is using Cisco UCS and wants a network orchestration solution to meet these requirements :
centrally manage compute and storage platforms
reduce the time it takes to detect an outage
easily exchange data with TAC to reduce resolution times
The company does not have in-house knowledge about scripting. Which solution must the company choose?
- A. Cisco UCS Central
- B. Cisco HyperFlex
- C. Cisco DCNM
- D. Cisco Intersight
Answer: D
NEW QUESTION # 25
Which Cisco HyperFlex feature provides virtual machine-level cost scaling for desktop virtualization growth?
- A. dedicated compute nodes
- B. encryption offload cards
- C. fabric interconnects
- D. HyperFlex Edge support
Answer: D
NEW QUESTION # 26
Which feature must be configured to connect a classical Ethernet network to a data center network so that the data center network appears to be one large switch.
- A. VPC+
- B. EVPN
- C. UDLD
- D. OSPF
Answer: B
Explanation:
Section: Network Design
NEW QUESTION # 27
An engineer must design a VXLAN EVPN network. The solution should optimize broadcast, unknown unicast, and multicast (BUM) and short BUM replication, and use PIM anycast RP.
Which solution should be included in the design?
- A. head-end replication
- B. ingress replication
- C. PIM dense mode
- D. PIM sparse mode
Answer: B
NEW QUESTION # 28
Which two vSphere features must be included in the design of a Cisco HyperFlex systems stretched cluster?
(Choose two.)
- A. HA
- B. DRS
- C. VDP
- D. VSS
- E. FT
Answer: A,B
NEW QUESTION # 29
Where does Cisco UCS handle Fibre Channel traffic failover?
- A. on the host, by using multipathing software
- B. in the hardware on any Cisco UCS VIC adapter
- C. on a Cisco UCS Fabric Interconnect ASIC in Fibre Channel switching mode
- D. in the hardware on the Cisco UCS VIC 12xx adapter or later
Answer: A
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-computing/ whitepaper_c11-701962.html
NEW QUESTION # 30
An engineer deploys VMware ESXi hypervisor on blade servers. The virtual networking is managed by Cisco Nexus 1000V Series Switches.
Which configuration aligns with Cisco recommended practices for providing high availability and a maximum throughput to the VMware ESXi hosts?
- A. dual vNICs with MAC pinning link aggregation
- B. dual vNICs with LACP link aggregation
- C. dual vNICs with static EtherChannel link aggregation
- D. dual vNICs with hardware fabric failover on the fabric interconnects
Answer: B
NEW QUESTION # 31
An engineer configured the OSPF protocol in the vPC topology. During the catastrophic failure of one of the vPC member switches, the traffic was routed to a black hole. This route was caused by the long convergence time caused by the delay of the vPC member switch reboot. After the failure, the engineer rebooted both switches, but the secondary switch powered on before the primary one. It caused all the vPCs to be shut down due to consistency-check violations.
Which two features must be used to prevent these situations from happening in the future? (Choose two.)
- A. peer-gateway
- B. auto-recovery
- C. ip arp synchronize
- D. delay restore
- E. system priority
Answer: B,D
NEW QUESTION # 32
Refer to the exhibit.
A high-availability setup for iSCSI is designed with the host running iSCSI multipath software. Each IP storage port on the MDS switch exports the same two Fibre Channel target ports with different iSCSI target names.
In this design, how many iSCSI sessions are created from the host so that recovery occurs if any component fails?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 33
A cloud provider deploys an infrastructure based on Cisco ACI Fabric, Cisco UCS, and Cisco HyperFlex Data Platform. The storage area network will be based on Cisco MDS 9000 Series Switches with Hyper-V, VMware, and KVM used as the virtualization platform. The requirement is to deploy the overall solution by using a robust automation and orchestration tool.
Which tool meets these requirements?
- A. Cisco UCS Director
- B. Cisco Prime Infrastructure
- C. Cisco Cloud Center
- D. Cisco Network Assurance
Answer: A
NEW QUESTION # 34
A network architect proposes a distinct Fibre Channel fabric to be used for a Cisco UCS blade server that hosts critical applications. Which action should be implemented for the fibre Channel traffic from the vHBA of this service to pass through the I/O module in the Cisco chassis to a specified uplink Fibre Channel port?
- A. Enable persistent binding in the vHBA policy.
- B. Include a SAN pin group in the vHBA policy.
- C. Update the applled Fibre Channel adapter policy.
- D. Update the applled global QoS policy.
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Storage-Mgmt/3-2/b_UCSM_GUI_Storage_Management_Guide_3_2/b_UCSM_GUI_Storage_Management_Guide_3_2_chapter_0110.pdf
NEW QUESTION # 35
A storage engineer requires a solution that achieves multiple paths between a server and storage array. The design must support complete traffic isolation and support a 50% growth in the next year. Which FCoE solution meets these requirements?
- A. at least two VSANs across the fabric
- B. at least two FC zone sets with multiple zones
- C. single switch with multiple links
- D. single VSAN across the fabric
Answer: A
NEW QUESTION # 36
What is a design consideration when implementing FSPF?
- A. Routes are based on the distance vector protocol.
- B. FSPF runs on a per-chassis basis.
- C. FSPF runs only on F Ports.
- D. Routes are based on the domain ID.
Answer: D
Explanation:
Section: Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/ fabric/nxos/cli_fabric/fspf.html
NEW QUESTION # 37
......
300-610 Exam Info and Free Practice Test Professional Quiz Study Materials: https://troytec.dumpstorrent.com/300-610-exam-prep.html